How Window Seal Failure Affects Comfort and Energy Efficiency
Windows play an important role in maintaining comfortable indoor temperatures, reducing energy loss, and protecting homes from changing weather conditions. However, when window seals begin to deteriorate, homeowners may notice foggy glass, persistent condensation, uncomfortable drafts, or reduced window performance. These problems can become particularly noticeable during Michigan’s freezing winters and humid summers. At Worthy Construction, we help homeowners throughout Kalamazoo and Southwest Michigan understand common window problems and identify practical solutions. Recognizing broken window seal signs, understanding window seal failure symptoms, and knowing how a failed window seal affects energy efficiency can help homeowners protect their properties and maintain comfortable living spaces.
What Is Window Seal Failure?
Window seal failure occurs when a sealing component no longer provides its intended protection against moisture, air movement, or environmental exposure.
Modern double-pane and triple-pane windows contain multiple layers of glass separated by an insulating space. This assembly is known as an insulating glass unit (IGU).
The space between the glass panes may contain air or an insulating gas, such as argon, which helps reduce heat transfer.
A perimeter sealing system protects this enclosed space and limits moisture infiltration.
When the seal deteriorates, outside air and water vapor may enter the space between the panes. Over time, homeowners may notice fogging, condensation, or permanent staining inside the glass.
However, windows contain different types of seals that perform different functions.
Insulating glass seals protect the enclosed space between glass panes.
Weatherstripping and perimeter seals help prevent unwanted air and water from entering around the window sash and frame.
Understanding this distinction is important because a failed insulating glass seal does not necessarily create a noticeable draft, while damaged weatherstripping may allow outdoor air to enter even when the glass remains properly sealed.
6 Common Broken Window Seal Signs Homeowners Should Recognize
Window seal problems often develop gradually. Recognizing the warning signs can help homeowners determine when maintenance or professional evaluation is necessary.
1. Persistent Fogging Between Glass Panes
One of the most recognizable signs of insulating glass seal failure is fogging that develops between the panes of double-pane or triple-pane windows. Unlike ordinary surface condensation, this moisture cannot be wiped away from either side of the glass. The fogging may initially appear only during temperature changes before becoming more persistent. We recommend checking where the moisture is located before assuming that indoor humidity is responsible. Cloudiness trapped within the sealed glass assembly commonly indicates deterioration of the insulating glass seal.
2. Moisture Between Window Panes
Visible moisture between window panes often indicates that water vapor has entered the sealed glass space. The moisture may appear as small droplets, streaks, or cloudy patches that change with outdoor temperatures. Over time, repeated condensation can leave deposits on the internal glass surfaces. We recommend addressing persistent moisture because it indicates that the glass assembly is no longer maintaining its intended sealed condition. Although trapped moisture does not automatically mean water is entering the surrounding wall, the affected insulating glass unit may require replacement.
3. Permanent Streaks or Mineral Deposits
When water vapor repeatedly enters a damaged insulating glass unit, it can leave visible deposits between the panes. These stains may remain even after the glass appears dry. Homeowners often mistake the marks for dirt or cleaning residue, but ordinary glass cleaners cannot remove deposits trapped inside the sealed assembly. We recommend evaluating windows that remain cloudy after both exposed surfaces have been cleaned. Persistent internal staining may indicate that the insulating glass unit has experienced prolonged moisture exposure and deterioration.
4. Cold Drafts Around Window Frames
Drafts near closed windows can make living spaces uncomfortable during winter. However, moving air usually indicates problems with weatherstripping, frame joints, or installation gaps rather than failure of the insulating glass seal itself. We recommend examining the window sash, locking hardware, and surrounding frame when noticeable drafts occur. Damaged seals around operable components can allow cold outdoor air to enter, increasing heating demands and creating uneven indoor temperatures.
5. Changes in Indoor Comfort
Windows with reduced insulating performance may contribute to colder interior glass surfaces during winter. Homeowners may feel uncomfortable near affected windows even when the thermostat indicates a normal room temperature. However, temperature differences can also result from inadequate insulation, air leakage, or uneven heating. We recommend evaluating the entire window assembly rather than assuming that a single damaged glass seal is responsible. Identifying the actual source of discomfort helps homeowners select appropriate repairs or improvements.
6. Visible Frame and Seal Deterioration
Cracked exterior sealant, damaged weatherstripping, deteriorated frames, and loose trim can indicate problems with the window assembly. Although these conditions do not necessarily prove insulating glass seal failure, they can contribute to drafts, water infiltration, and reduced overall performance. We recommend inspecting visible joints and surrounding materials for signs of deterioration. Addressing these problems early can help protect nearby insulation, drywall, and wooden framing from additional moisture-related damage.
What Causes Window Seals to Fail?
Window seals are designed to withstand normal environmental exposure, but several conditions can contribute to deterioration over time.
1. Repeated Temperature Changes
Michigan experiences substantial seasonal temperature changes, including freezing winters and warm summers. These fluctuations cause window materials to expand and contract repeatedly. Over time, thermal movement can contribute to stress on sealing components, particularly when materials have already aged or deteriorated. We recommend monitoring older windows for recurring internal fogging and visible changes in performance. Temperature fluctuations are a normal part of window operation, but repeated exposure can contribute to long-term material wear.
2. Natural Aging of Sealing Materials
Window sealants and related components gradually age because of environmental exposure and repeated use. Their durability depends on manufacturing quality, installation methods, material selection, and weather conditions. As sealing materials deteriorate, they may lose flexibility or develop weaknesses that affect their ability to maintain the enclosed glass space. We recommend evaluating older windows when fogging, staining, or other performance problems become noticeable. Age alone does not determine whether replacement is necessary, but it provides useful context when assessing the condition of the window.
3. Improper Window Installation
Incorrect installation can place unnecessary stress on window frames and insulating glass assemblies. When a frame is twisted, compressed, or improperly supported, normal movement may affect its components. Poor installation can also leave gaps that allow water or air infiltration around the opening. We recommend professional evaluation when window problems develop shortly after installation or occur alongside frame distortion, difficult operation, or recurring leaks. Correcting the underlying installation problem is essential before replacing damaged components.
4. Excessive Frame Movement
Windows rely on properly supported frames to maintain alignment and performance. Structural movement, settlement, or moisture-related deterioration can occasionally distort window openings. This may place additional stress on glazing seals and operating components. Homeowners may notice uneven gaps, difficult locking, or visible movement around the frame. We recommend investigating these symptoms when they appear together, particularly if the condition continues worsening. Significant movement may require evaluation of the surrounding structure before permanent window repairs are completed.
5. Manufacturing Defects
Insulating glass units contain multiple components that must work together to maintain a durable seal. Problems involving manufacturing processes, spacer construction, sealant application, or material compatibility may occasionally result in premature failure. We recommend reviewing manufacturer warranty information when relatively new windows develop persistent internal fogging. Some warranties provide coverage for qualifying insulating glass seal failures, depending on the product and warranty terms. Identifying potential coverage before arranging replacement may help homeowners avoid unnecessary expenses.
6. Prolonged Moisture Exposure
Water entering around window frames can contribute to deterioration of surrounding materials and certain sealing components. Damaged flashing, poor drainage, or deteriorated exterior sealant may allow moisture to reach vulnerable locations. We recommend identifying the source of recurring water intrusion before applying additional sealant or replacing visible materials. Correct water management helps protect the window opening and surrounding wall assembly while reducing the likelihood of further deterioration.
How a Failed Window Seal Affects Energy Efficiency
Windows contribute to a home’s overall thermal performance by controlling heat transfer between indoor and outdoor environments.
Modern insulating glass systems reduce unwanted heat movement through multiple glass layers, insulating spaces, and specialized coatings.
When the perimeter seal of an insulating glass unit fails, its performance may decline.
Reduced Insulating Performance
Some double-pane and triple-pane windows contain argon or another insulating gas between the glass layers.
If the perimeter seal deteriorates, the gas may gradually escape while outside air enters.
Depending on the window’s design, this can reduce its original insulating performance.
However, the actual effect varies according to the extent of the failure and the construction of the glass unit.
A broken insulating glass seal does not automatically mean dramatic energy loss, but it may reduce the window’s ability to limit heat transfer.
Greater Heat Loss During Winter
During Michigan winters, heating systems work to maintain comfortable indoor temperatures while outdoor air remains cold.
Windows with reduced insulating performance may allow more heat to transfer through the glass than originally intended.
This can contribute to colder interior glass surfaces and greater discomfort near the window.
However, heat transfer through the glass differs from air leakage around the frame.
Both conditions can affect indoor comfort, but they require different solutions.
Increased Cooling Demands During Summer
Insulated windows also help limit unwanted heat transfer during warmer months.
When the insulating performance of a glass unit declines, maintaining comfortable indoor temperatures may become more difficult.
The actual effect on cooling costs depends on factors such as window orientation, solar exposure, shading, and the home’s insulation.
We recommend considering the window’s performance alongside other energy-related conditions rather than assuming that every increase in utility bills results from seal failure.
How Window Seal Failure Affects Indoor Comfort
Window problems can influence how comfortable a room feels, even when the heating or cooling system operates normally.
Cold Interior Glass Surfaces
Reduced insulating performance can make the room-facing glass surface colder during winter.
People sitting near the window may experience discomfort from radiant heat loss, particularly during prolonged periods of freezing weather.
We recommend evaluating glazing performance and surrounding insulation when certain areas consistently feel colder than the rest of the room.
Uneven Room Temperatures
Older or poorly performing windows may contribute to noticeable temperature differences within a room.
However, air leakage, insulation weaknesses, heating distribution, and window placement also affect comfort.
We recommend identifying the actual source of temperature differences before choosing repairs.
Replacing damaged glazing may help restore performance, but additional improvements may be necessary when other building components contribute to the problem.
Reduced Visibility and Natural Light
Persistent fogging between glass panes can reduce visibility and affect the appearance of a room.
As moisture deposits accumulate inside the insulating glass unit, the window may develop permanent cloudiness.
This can interfere with outdoor views and reduce the clarity of natural light entering the home.
In many cases, replacing the affected glass unit is the most reliable way to restore clear visibility.
Window Seal Failure vs Normal Window Condensation
Not every foggy window has a damaged insulating glass seal. Understanding where moisture develops and how long it remains can help homeowners identify whether the problem involves normal condensation, deteriorated window seals, or water infiltration.
1. Moisture on the Interior Glass Surface
Condensation on the inside surface of a window usually occurs when warm, humid indoor air contacts cold glass. This is particularly common during Michigan winters when outdoor temperatures fall below freezing. The moisture can typically be wiped away with a cloth. We recommend monitoring indoor humidity, improving ventilation, and allowing warm air to circulate near windows to reduce condensation. Persistent moisture should not be ignored because water collecting on sills and trim can contribute to deterioration.
2. Moisture on the Exterior Glass Surface
Exterior condensation develops when the outside glass surface becomes cooler than the surrounding air’s dew point. This can occur during humid mornings, especially on well-insulated windows that prevent indoor heat from warming the outer glass. Exterior condensation is generally harmless and usually disappears as temperatures rise. We recommend allowing the moisture to evaporate naturally unless other signs of damage are present. Exterior fogging alone does not indicate that the insulating glass seal has failed.
3. Fogging or Moisture Between Glass Panes
Persistent moisture between window panes is one of the clearest indicators of insulating glass seal failure. When the perimeter seal deteriorates, water vapor can enter the enclosed space between the glass layers. Unlike ordinary condensation, this moisture cannot be removed by wiping the window surfaces. We recommend professional evaluation because the affected insulating glass unit may require replacement to restore visibility and its intended thermal performance.
4. Cold Drafts Around Window Frames
Drafts around closed windows generally indicate deteriorated weatherstripping, gaps around the frame, or improper installation rather than a failed insulating glass seal. These openings allow cold outdoor air to enter during winter, affecting indoor comfort and potentially increasing heating demands. We recommend examining the weatherstripping, locking hardware, and surrounding installation joints to identify air leakage and determine the appropriate repairs. Properly sealing these areas can improve comfort without necessarily replacing the glass.
5. Water Stains Around Window Openings
Water stains, peeling paint, and damp materials around window frames may indicate problems with flashing, exterior sealant, drainage, or surrounding wall components. Unlike condensation trapped between glass panes, these conditions may allow moisture to reach interior building materials. We recommend investigating the source promptly because prolonged water exposure can damage wood, drywall, and insulation. Addressing the source of moisture is essential before repairing stained or deteriorated finishes.
The key difference: Normal window condensation forms on exposed glass surfaces and can usually be wiped away. A failed window seal often causes fogging or moisture trapped between sealed glass panes, which cannot be removed through ordinary cleaning.
Can Window Seal Failure Cause Mold or Water Damage?
A failed insulating glass seal primarily affects the enclosed space between glass panes.
Moisture trapped inside this space does not automatically enter the surrounding wall or interior room.
However, deteriorated weatherstripping, damaged flashing, and poor exterior sealing can create separate water infiltration problems.
Repeated moisture exposure around window openings may contribute to:
- Peeling or bubbling paint.
- Water stains on interior trim.
- Soft or deteriorated wooden frames.
- Damaged drywall and insulation.
- Mold growth on persistently damp materials.
We recommend determining whether moisture is trapped inside the insulating glass unit or entering around the window opening.
Identifying the correct source helps prevent unnecessary repairs and protects surrounding building materials.
If water damage extends into adjacent exterior finishes, professional siding repair may be appropriate after the source of moisture has been identified and corrected.
Can a Failed Window Seal Be Repaired Without Replacing the Window?
The appropriate repair depends on which part of the window assembly has failed.
Damaged weatherstripping or deteriorated exterior sealant can often be replaced without removing the entire window.
However, failure of the insulating glass seal presents a different challenge.
Modern insulating glass units are manufactured with sealed spaces designed to maintain specific insulating conditions.
Once the perimeter seal fails, applying ordinary caulk around the exterior glass does not restore the original factory-sealed performance.
Some services offer defogging procedures that may improve the appearance of cloudy glass.
However, these procedures generally do not restore the original insulating gas fill or thermal performance.
We recommend evaluating the condition of the frame and glazing before choosing a solution.
If the frame remains in good condition, replacing only the insulating glass unit may be practical.
When several components have deteriorated, a more comprehensive replacement may provide better long-term value.
When Window Replacement Is the Better Option
Not every failed insulating glass unit requires replacing the entire window assembly.
However, complete window replacement may be appropriate when the existing window has extensive deterioration or multiple performance problems.
We recommend considering replacement when:
- Multiple windows have persistent internal fogging.
- Frames are severely warped or deteriorated.
- Drafts remain despite weatherstripping repairs.
- Windows are difficult to open or close.
- Compatible replacement glass is unavailable.
- Existing glazing provides poor overall thermal performance.
New windows may offer improved insulation, updated frame materials, more reliable operating hardware, and better weather resistance.
For homeowners in Southwest Michigan, selecting suitable products can help improve comfort during both winter and summer.
How Energy-Efficient Windows Improve Indoor Comfort
Modern energy efficient windows are designed to reduce unwanted heat transfer and support more consistent indoor temperatures.
Depending on the product, these windows may include multiple glass layers, insulating gas fills, low-emissivity coatings, and improved spacer systems.
These features can help maintain warmer interior glass surfaces during winter and limit heat transfer during summer.
When comparing replacement windows, homeowners should understand several important performance ratings.
U-Factor
U-factor measures the rate of heat transfer through a window.
Lower values generally indicate better insulating performance.
For Michigan homes, suitable U-factor ratings can help reduce heat loss during cold weather.
Solar Heat Gain Coefficient
Solar Heat Gain Coefficient measures how much solar radiation enters through the window.
The appropriate rating depends on window orientation, shading, climate, and the home’s heating and cooling requirements.
Air Leakage
Air leakage ratings indicate the amount of air that passes through a window assembly under standardized testing conditions.
Lower leakage can help reduce drafts and improve indoor comfort.
Condensation Resistance
Some window performance ratings describe a product’s resistance to interior surface condensation under specific conditions.
Better condensation resistance can be helpful in cold climates, although managing indoor humidity remains important.
We recommend comparing these characteristics when selecting replacement windows rather than relying only on appearance or price.
How Proper Window Installation Protects Long-Term Performance
Even high-quality windows depend on correct installation.
Improper alignment, inadequate support, or poor sealing around the frame can contribute to drafts, water infiltration, and operating problems.
Professional installation involves preparing the opening, positioning the frame correctly, securing the assembly, and integrating suitable flashing and air-sealing materials.
The installation must also preserve the window’s intended drainage features.
We recommend evaluating the surrounding wall condition before replacing damaged windows, particularly when previous moisture problems are present.
Correct installation helps maintain the manufacturer’s intended performance and reduces avoidable stress on window components.
Why Window Seal Problems Become Noticeable During Michigan Winters
Michigan winters can expose weaknesses in older window systems.
When outdoor temperatures fall below freezing, the difference between indoor and outdoor conditions becomes substantial.
Windows with reduced insulating performance may develop colder interior glass surfaces, making discomfort near the window more noticeable.
Damaged weatherstripping can also allow cold air to enter around the frame.
However, ordinary surface condensation during winter does not automatically indicate insulating glass failure.
We recommend identifying whether moisture forms on the exposed interior surface or remains trapped between sealed panes.
Older Kalamazoo homes may have several overlapping issues, including aging glazing, deteriorated seals, and inadequate insulation around window openings.
Evaluating these conditions together helps identify the most effective improvements.
5 Ways to Help Prevent Premature Window Seal Problems
Although no maintenance routine can guarantee that insulating glass seals will last indefinitely, regular attention can help preserve the surrounding window assembly.
1. Inspect Window Frames Regularly
Check window frames for cracks, deteriorated finishes, visible gaps, and signs of water intrusion. Early identification of these conditions can help prevent additional damage to surrounding materials. We recommend inspecting windows during spring and fall, when seasonal weather changes may reveal existing weaknesses. Pay particular attention to peeling paint, softened wood, and damaged joints. Addressing problems promptly can help maintain the overall condition of the window assembly.
2. Maintain Weatherstripping
Weatherstripping helps prevent unwanted air movement around operable windows. Over time, it can become compressed, torn, loose, or displaced. We recommend inspecting these seals periodically and replacing damaged sections with compatible materials. Proper weatherstripping supports indoor comfort and reduces drafts. However, it is important to understand that replacing weatherstripping does not repair a failed insulating glass seal. Each component serves a different function within the window system.
3. Keep Drainage Openings Clear
Some window frames contain drainage channels or weep holes that allow incidental water to escape. When these openings become blocked by dirt or debris, moisture may accumulate inside the frame. We recommend cleaning accessible drainage areas according to manufacturer instructions. Avoid applying sealant over openings designed for drainage. Proper water management helps reduce unnecessary moisture exposure and protects surrounding materials from deterioration.
4. Repair Deteriorated Exterior Sealant
Exterior sealant helps protect appropriate joints around window openings from water infiltration. When these materials crack, separate, or deteriorate, rainwater may reach vulnerable areas. We recommend checking visible joints regularly and using suitable repair materials when necessary. Repairs should follow manufacturer requirements and preserve designed drainage paths. Applying additional caulk without identifying the source of leakage may trap moisture rather than solve the problem.
5. Monitor Changes in Window Appearance and Performance
Changes in window appearance can provide useful information about developing problems. We recommend observing when fogging appears, whether it can be wiped away, and whether drafts or water stains are also present. Persistent haze between glass panes often indicates a different problem from surface condensation. Keeping track of these symptoms can help homeowners explain the issue during a professional evaluation and determine whether targeted repairs or replacement may be appropriate.
Frequently Asked Questions About Window Seal Failure
What Are the Most Common Signs of a Failed Window Seal?
The most recognizable signs of insulating glass seal failure include fogging, condensation, or staining trapped between the panes of double-pane or triple-pane windows. This moisture cannot be removed by wiping either exposed glass surface. We recommend distinguishing internal fogging from ordinary condensation caused by indoor humidity. Drafts around the window frame may indicate damaged weatherstripping or installation gaps rather than failure of the sealed glass unit. A professional evaluation can help identify which component requires attention.
Does a Broken Window Seal Increase Energy Bills?
A broken insulating glass seal may reduce energy efficiency, particularly when insulating gas escapes from the sealed space. However, the actual impact on heating and cooling costs depends on the window’s design, the extent of deterioration, and the home’s overall thermal performance. We recommend evaluating other sources of energy loss, including air leaks and inadequate insulation, before attributing higher bills to one damaged window. Replacing the affected insulating glass unit may help restore its intended thermal performance.
Can Moisture Between Window Panes Be Removed Permanently?
Moisture trapped between sealed glass panes generally indicates that the insulating glass unit has lost its original seal integrity. Cleaning the exposed surfaces cannot remove this moisture. Certain defogging procedures may improve appearance, but they usually do not restore the original factory-sealed insulating performance. We recommend evaluating whether the glass unit can be replaced while retaining the existing frame. Complete replacement may be more practical when surrounding components are also deteriorated or the window no longer performs satisfactorily.
Should I Replace the Entire Window if the Seal Fails?
Not necessarily. If the frame remains structurally sound and compatible replacement glazing is available, replacing only the insulating glass unit may be sufficient. Complete replacement may be more appropriate when the frame is damaged, operating hardware has deteriorated, or the window has significant energy-performance limitations. We recommend comparing repair costs, component availability, and the expected remaining lifespan of the existing assembly. This approach helps homeowners select a practical solution without replacing functional materials unnecessarily.
How Long Do Window Seals Typically Last?
The lifespan of insulating glass seals varies depending on manufacturing quality, window construction, installation, climate, and environmental exposure. Many insulated glass units remain functional for decades, while others may experience premature failure. There is no single guaranteed lifespan that applies to every window. We recommend reviewing product warranties and monitoring for persistent internal fogging or staining. Maintaining surrounding frames, drainage systems, and exterior sealing materials can help protect the overall window assembly throughout its service life.
Conclusion
Window seal failure can affect visibility, thermal performance, and indoor comfort, especially when moisture becomes trapped between glass panes or deteriorated window components allow unwanted air movement. Understanding the difference between insulating glass failure, damaged weatherstripping, and ordinary condensation helps homeowners choose the appropriate solution.
Regular inspections, proper maintenance, and timely repairs can help preserve window performance and protect surrounding building materials.
When existing windows have extensive deterioration or no longer provide satisfactory thermal performance, professional replacement may offer lasting improvements in comfort and energy efficiency.
As an experienced roofing contractor in Kalamazoo, MI, we understand how windows, roofing, insulation, and other exterior components work together to protect residential properties. At Worthy Construction, we help homeowners throughout Kalamazoo and Southwest Michigan improve their homes through dependable exterior solutions. Whether you are experiencing persistent foggy glass, damaged window seals, or aging windows that no longer perform effectively, contact Worthy Construction to discuss practical options for improving comfort, efficiency, and long-term home protection.
Kathy MizikarTrustindex verifies that the original source of the review is Google. We are so happy with our new roof from Worthy Construction! Khari was fantastic—highly knowledgeable, super helpful in choosing our shingles, and completely pressure-free. The people on the crew were friendly and did an excellent job cleaning up at the end of the project. We got a quality roof at a reasonable price! Church OfficeTrustindex verifies that the original source of the review is Google. Fantastic from beginning to end. Khari handled everything and fielded all questions with professionalism, confidence, care and promptness. He was a joy to work with and it never felt as though we were dealing with a "sales" person, he wasn't pushy or demanding, just gave solid straightforward answers and insight to process! Stayed in contact from start to finish. 10/10 would recommend and use again! David SnyderTrustindex verifies that the original source of the review is Google. They were very professional and kind. The project was completed quickly and right in line with the estimate. 10/10 would recommend! Ervan RodgersTrustindex verifies that the original source of the review is Google. Top notch professional experience from quote to finished roof! I highly recommend Worthy Construction LLC to anyone! martin athertonTrustindex verifies that the original source of the review is Google. Can’t say enough “good” about the complete experience and end product. There was noise, mild disruption, some inconvenience. But the end result (see pic) was a major facelift for my house. They installed flashing for additional water drainage, repaired ice damage, removed two roof layers, laid down protective undercoating, installed proper vents along the roof apex, everything. Highly rated. I got this contractors name from a friend and I am completely satisfied. I recommend this contractor with confidence. Five stars. Will TTrustindex verifies that the original source of the review is Google. I had a full roof replacement as well as gutters on a custom house with multiple bay windows. It's remarkable the volume and quality of the work they could accomplish in such a short time and how meticulous and clean they were. The entire crew were professional and kind and Khari is fantastic. It was an outstanding experience from start to finish. DrewTrustindex verifies that the original source of the review is Google. They did a great job and were a good price especially for the quality of work they did. I tried multiple quotes and they fit the bill perfectly. Thank you again got it done quick and looks great I would recommend! Katherine G. BartonTrustindex verifies that the original source of the review is Google. I recently had my roof and gutters replaced by Worthy. The owner, Khari came out to do the quote and was very professional and not at all pushy. The price I paid was comparable to other quotes I had gotten but the quality of the shingles was better (they use Malarkey). Would for sure recommend this company for roof or gutters. Valerie ReillyTrustindex verifies that the original source of the review is Google. Five stars for quality service on all 4 jobs! Worthy replaced my roof, Gutters this spring Did the flashing on my deck last year And repaired the water damaged ceiling in my garage recently, so it all looks perfect again. Cost was affordable. Questions always answered in a friendly, caring matter. (And we had many questions) I highly recommend this company!